Structural steels resistant to atmospheric corrosion as per EN 10025-5

Standards 
EuropeMaterial no.DFGBUSAJ
EN 10025-5 SEW 087 NFA 35-502 BS 4360 ASTMJIS G 3114
S235J0W1.8958-E 24 W 3 --
S235J2W1.8961 WTSt 37-3 E 24 W 4 --
S355J0WP1.8945 -E 36 WA 3WR 50 A -
S355J2WP1.8946 -E 36 WA 4 -A 242 Type 1 -
Feasibility range
GradeThicknessWidth
 min.max.max.
S235J0W1.458.01575
S235J2W1.458.01575
S355J0WP2.08.01575
S355J2WP2.08.01575

1) For thicknesses up to 2.5 mm maximum width is 1520mm
2) Feasibility on the specific combination of thickness and width must be verified during the order phase.

Chemical composition
GradeCSiMnPSNCr
 max.max.  max.max.max.
S235J0W0.130.400.20 - 0.60max. 0.0350.0350.0090.40 - 0.80
S235J2W0.130.400.20 - 0.60max. 0.0350.030 0.40 - 0.80 
S355J0WP0.120.75max. 1.0000.06 - 0.150.0350.0090.30 - 1.25
S355J2WP0.120.75max. 1.0000.06 - 0.150.030 0.30 - 1.25
Mechanical properties 
GradeYield strengthTensile stengthElongation min
 MPaMPa%%
     L0 = 80 mmL0 = 5,56 √S0
 s ≤ 16s > 16s < 3s ≥ 3s ≤ 22 < s <2.52.5 < s < 3
S235J0W235225360 - 510360 - 51019/1720/1821/19
S235J2W235225360 - 510360 - 51019/1720/1821/19
S355J0WP355-510 - 680470 - 63016/1417/1518/16
S355J2WP355-510 - 680470 - 63016/1417/1518/16


1) s = nominal thickness in mm

(copy 2)

Notch impact energy in condition of delivery (minimum values obtained using Charpy-V samples) 
MarcaTemperatureNotch impact energy
 °C J
S235J0W 027
S235J2W-2027
S355J0WP027
S355J2WP-2027